NRS 116.2109

����� 1. Plats are a part of the declaration, and are required for all common-interest communities except cooperatives. Each plat must be clear and legible and contain a certification that the plat contains all information required by this section. ����� 2. Each plat must comply with the provisions of chapter 278 of NRS and show: ����� (a) The name and a survey of the area which is the subject of the plat; ����� (b) A sufficient description of the real estate; ����� (c) The extent of any encroachments by or upon any portion of the property which is the subject of the plat; ����� (d) The location and dimensions of all easements having a specific location and dimension which serve or burden any portion of the common-interest community; ����� (e) The location and dimensions, with reference to an established datum, of any vertical unit boundaries and that unit�s identifying number; ����� (f) The location with reference to an established datum of any horizontal unit boundaries not shown or projected on plats recorded pursuant to subsection 3 and that unit�s identifying number; and ����� (g) The location and dimensions of limited common elements, including porches, balconies and patios, other than parking spaces and the other limited common elements described in subsections 2 and 4 of NRS 116.2102 . ����� 3. The plats must show or project any units in which the declarant has reserved the right to create additional units or common elements (paragraph (h) of subsection 1 of NRS 116.2105 ), identified appropriately. ����� 4. Unless the declaration provides otherwise, when the horizontal boundaries of part of a unit located outside a building have the same elevation as the horizontal boundaries of the inside part, the elevations need not be depicted on the plats. ����� 5. Upon exercising any developmental right, the declarant shall record new or amended plats necessary to conform to the requirements of subsection 2. ����� 6. Each plat must be certified by a professional land surveyor.